Botas de patinaje sobre hielo Mybonts LT Vaypor Streamline
Botas de patinaje sobre hielo Mybonts LT Vaypor Streamline
Made for long track
Your colors. Built for the oval.
Your colors. A heat-moldable carbon base as standard. Built for long track speed skating.
- 01
Carbon support. Low weight.
A 100% carbon fiber base, including unidirectional carbon, gives this long track boot its lightweight structure.
Explore the base - 02
A fit you can refine.
The standard heat-moldable base lets you personalize the shape after choosing the right size and width.
Explore the fit - 03
Lace up. Zip closed.
Laces adjust the closure, while the zipped cover keeps them enclosed for a clean boot profile.
Explore the closure - 04
Comfort inside the boot.
Padding and liner choices let you balance a close-fitting feel with extra cushioning.
Explore the comfort
White LT Vaypor Streamline boots show the construction details. MyBonts colors and materials depend on your selections.
Made to your specifications
More than your colors.
Use the MyBonts builder to choose the feel as well as the finish.
- 01
Start with the fit.
Measure both feet, choose your size, and review the fit options before choosing your colors.
- 02
Choose your comfort.
Review the padding and liner choices to match the feel you want around your foot.
- 03
Refine your setup.
Compare the available stiffness, material, and color options in the builder. Your selections define the pair we make.
Find your size
Measure first. Then refine the fit.
Measure both feet in your skating socks and compare the measurements with the Bont size chart.
01Start on a hard floor.
Stand on paper in your skating socks. Keep your weight evenly on both feet.
02Mark length and width.
Mark the length and width of both feet with the pencil held upright.
03Compare your measurements.
Measure in millimeters and use the Bont size chart to select your size.
Complete the setup: Euro mounting separation varies with boot size. Check that your blade matches the boot size you choose. View mounting details
Open the Bont size chartThe details, when you need them.
Carbon base and 12mm pitch
The base is made from 100% carbon fiber, including unidirectional carbon, with a matte finish. This combines a lightweight structure with the support of a carbon racing boot.
Specified pitch: 12mm. Pitch is a boot specification, not the blade mounting separation.
Heat molding and resin
The standard base is fully heat moldable and uses epoxy thermoset resin. Start with the correct size and width, then follow Bont’s instructions when refining the shape.
The builder also offers a non-heat-moldable configuration. Heat-molding guidance applies only when you select the heat-moldable option.
Durolite upper and zipper cover
The standard outer skin is Durolite. Laces provide the adjustable closure, and a zipper lace cover encloses the laces.
Use the MyBonts builder above to choose the front panel, heel cap, tongue, zipper cover, logos, stitching, laces, and zipper. The selected options define your finished design.
Lining, padding, and innersole
High-density memory foam padding cushions the foot, with a leather innersole. In Fit & details, choose Performance padding (Standard 4mm 35A) or Comfort padding (4mm 35A + 3mm foam).
Current liner choices are Standard Black Furry Durolite, Suede-L, and Black Durolite Liner. Any additional charge is shown with the option.
The top-view photograph shows the boot opening and lining; the padding itself sits beneath the lining.
Euro separation and sizing
This boot is made with Euro separation. The distance between the blade mounting points depends on the size of the boot, rather than being one fixed spacing across all sizes.
Check that your blade’s mounting separation matches the selected boot size. The current MyBonts size selector offers 24 sizes from 1 to 13, including the listed half sizes.
Your colors and custom fit
Choose your design using the current MyBonts options above. Colors shown on screen are a close representation; the finished color and material texture may differ slightly.
MyBonts color customization is separate from a custom-made fit. Custom-made boots can be ordered at an additional cost.
Fit and build options
Open Fit & details beside the size selector to choose ankle width, arch shape, room for growth, boot height, boot stiffness, heat moldability, padding, lining, and a custom name.
Standard Low Cut and Standard Soft are the current defaults. High Cut, Hard, and Super Stiff are available selections. Additional option prices are displayed before you add the boots to your cart.
The Type selector starts at Boot Only. If you choose Package, select a blade from the available options and check its mounting compatibility with your boot size.
Made-to-order production
The MyBonts LT Vaypor Streamline is made to order and is not kept in stock. The usual production time is 6 to 8 weeks to make the boots. This is production time, rather than a delivery date.