Descrizione
Bont SL Two Race Slalom Skate Boot
The Bont SL Two is a race slalom skate boot designed to deliver responsive performance at a more accessible price point. Built with a 50% carbon fiber and 50% fiberglass base, the SL Two combines the support and control needed for race slalom with practical materials selected to balance performance and value.
Its close performance fit, heat-moldable base and race-specific design give developing and experienced race slalom skaters the connection they need for acceleration, rapid direction changes and precise control through the course.
Key Product Points
- Purpose-built specifically for race slalom skating
- 50% carbon fiber / 50% fiberglass base balances stiffness, performance and value
- Heat-moldable base allows the fit to be refined around the foot
- Close performance fit helps reduce unwanted movement inside the boot
- Shiny blue lined TPU and black Durolite upper
- Suede-L lining with thin 0.1 mm neoprene padding
- Standard aluminium mounting block
- Standard Bont buckle
- Available in sizes 180 mm to 315 mm
- Made to order and completed within six weeks
Product Description
Built Specifically for Race Slalom
Race slalom demands quick acceleration, precise turns and rapid transitions from one direction to the next. The SL Two is designed specifically around these requirements, giving skaters a supportive, responsive platform for training and competition.
Rather than trying to serve multiple skating disciplines, its construction focuses on the close fit and control needed to navigate a slalom course at speed.
The SL Two provides a more accessible alternative to the premium SL One. Both boots share the same race slalom focus, while the SL Two uses a carbon fiber and fiberglass composite base and more economical materials to deliver dedicated race slalom performance at a lower price point.
Carbon Fiber + Fiberglass Composite Base
The SL Two uses a 50% carbon fiber and 50% fiberglass base.
This composite construction provides the stiffness and support required for race slalom while helping make the SL Two more affordable than the full-carbon SL One.
During acceleration and direction changes, the supportive base helps translate movements of the foot into the skate. This creates a predictable connection between the skater and frame, making it easier to control line, pressure and timing through the course.
For skaters progressing into competitive race slalom or those looking for race-specific performance without stepping up to a full-carbon boot, the SL Two offers a practical balance of performance and value.

Heat-Moldable Fit for Better Foot Control
A secure fit is particularly important in race slalom, where unwanted movement inside the boot can reduce control during rapid changes of direction.
The SL Two's heat-moldable base allows the fit to be refined around the individual foot. Heat molding can help improve heel hold, accommodate pressure points and create a closer connection between the foot and boot.
A properly fitted boot helps keep the foot supported so smaller movements can produce a cleaner and more predictable response through the skate.
Heat molding should be carried out carefully according to Bont's fitting instructions. Skaters unfamiliar with heat molding should seek assistance from an experienced Bont dealer or skate fitter.
Close Fit and Direct Feedback
The SL Two uses a close-fitting race profile designed to keep the foot secure during acceleration, turns and transitions.
Inside, a Suede-L lining with 0.1 mm neoprene padding provides a thin layer of comfort without excessive bulk. This maintains the direct feel expected from a race slalom boot while providing a comfortable interface against the foot.
The result is a purposeful performance fit designed around control rather than the thick cushioning found in recreational skating boots.
Skaters who prefer a soft, heavily padded boot should consider whether this race-focused fit suits their needs. The SL Two prioritizes support, control and feedback.

Built for Acceleration and Direction Changes
A race slalom boot needs to do more than support the foot through turns. It must also provide a stable platform for acceleration and remain predictable as speed increases.
The SL Two's composite base provides firm support through each push, while its close fit helps keep the foot connected to the boot. As the skater enters the course, this combination supports rapid changes in direction and precise adjustments to line and position.
Race slalom rewards accuracy and repeatability. A boot that responds consistently allows the skater to concentrate on timing, technique and the chosen line through the course.
Distinctive Performance Materials
The SL Two combines its composite base with a distinctive shiny blue lined TPU and black Durolite upper.
The iridescent blue finish gives the SL Two a standout race appearance, while the black Durolite provides a clean contrast around the lower portion of the boot.
The boot is completed with a standard aluminium mounting block and standard Bont buckle, providing a straightforward and reliable setup while helping position the SL Two as the more accessible model in Bont's race slalom range.

SL One vs SL Two
Both the SL One and SL Two are purpose-built for race slalom, but they offer different levels of construction and materials.
SL One
The premium model, featuring a 100% carbon fiber base and higher-grade materials for skaters seeking Bont's top-level race slalom construction.
SL Two
The more accessible model, featuring a 50% carbon fiber / 50% fiberglass base and more economical materials while maintaining a dedicated race slalom design.
Choose the SL One if maximum performance and premium materials are your priority.
Choose the SL Two if you want a dedicated race slalom boot at a more accessible price point.
Size-Specific Mounting Separation
The SL Two is available in sizes from 180 mm to 315 mm, with mounting separation matched to boot size:
- 180–245 mm: 150 mm separation
- 250–315 mm: 165 mm separation
Check your frame compatibility and required mounting separation before ordering.
Made to Order
Every SL Two boot is made to order. Each boot is produced specifically for the customer rather than supplied as a general stock item.
The SL Two will be completed within six weeks of the order being placed. Customers should allow for this production period when planning training and competition schedules. Delivery time after dispatch will depend on the destination and selected shipping service.
Before ordering, carefully check the Bont sizing information and available product options. Measure both feet and follow the correct Bont size chart to select the most appropriate size.
Technical Specifications
- Product: Bont SL Two
- Product type: Race slalom skate boot
- Discipline: Race slalom
- Size range: 180–315 mm
- Base: 50% carbon fiber / 50% fiberglass
- Outer skin: Shiny blue lined TPU and black Durolite
- Lining: Suede-L
- Padding: 0.1 mm neoprene
- Mounting block: Standard aluminium block
- Buckle: Standard Bont buckle
- Mounting separation, 180–245 mm: 150 mm
- Mounting separation, 250–315 mm: 165 mm
- Fit: Close-fitting race performance fit
- Heat moldable: Yes
- Production: Made to order
- Production time: Within six weeks
Frequently Asked Questions
What is the difference between the SL One and SL Two?
Both boots are designed specifically for race slalom. The primary difference is their construction and materials.
The SL One is the premium model and uses a 100% carbon fiber base with higher-grade materials. The SL Two uses a 50% carbon fiber / 50% fiberglass base and more economical materials, making it the more affordable option.
Who is the SL Two designed for?
The SL Two is designed for race slalom skaters who want a close, responsive boot specifically developed for the discipline. It is suitable for developing competitive racers as well as experienced skaters looking for dedicated race slalom performance without moving to the premium full-carbon SL One.
Is the SL Two suitable for general inline or fitness skating?
The SL Two is specifically designed for race slalom. Its firm construction and close performance fit prioritize precise control, acceleration and rapid direction changes.
Skaters looking for a softer boot primarily for recreational, fitness or general inline skating may prefer another Bont model.
Can the SL Two be heat molded?
Yes. The SL Two has a heat-moldable base that can be adjusted around the foot to improve fit, heel hold and accommodate pressure points.
Always follow Bont's official heat-molding instructions or seek assistance from an experienced Bont dealer or skate fitter.
What mounting separation does the SL Two use?
SL Two boots from 180 mm through 245 mm use 150 mm mounting separation.
Sizes from 250 mm through 315 mm use 165 mm mounting separation.
How long will my SL Two take to be made?
The SL Two is made to order and will be completed within six weeks of the order being placed. Delivery time after dispatch depends on your location and selected shipping service.
















