Descrizione
A short track package built around fit and control
The Bont Short Track One Ultrasprint Ice Skate Package brings together the ST One carbon-composite boot and a pair of Ultrasprint blades. In Gamma Blue/White, it combines Bont's heat-moldable boot construction with a clearly specified short track blade setup. Whether you are preparing for regular club sessions or working on your technique, this page lets you compare the fit, materials and components in one place.
Key Product Points
- Carbon-composite foundation: A hand-laid base provides the boot's supportive structure.
- Heat-moldable fit: The epoxy thermoset base allows fit refinement around your foot.
- Comfort around the ankle: High-density memory foam and thicker collar padding complement the higher cuff.
- Secure closure: Waxed laces, a lace cover and two hook-and-loop straps let you adjust the fit.
- Ultrasprint blades: A pair of short track blades, with the supplied length shown in your selected package option.
Bring your boot and blade choice together
A short track skate is a combination of parts that need to work together. The boot holds your foot, the mounting points connect it to the blade, and the blade setup influences the feel on the ice. This package brings those choices together around the ST One boot and Ultrasprint blade, with a 165mm boot mounting separation for the sizes offered here.
Use the package selector to see the boot size and blade length together before ordering. The photos show the appearance of the assembled combination, while the selected option identifies the length supplied. This makes it easier to discuss your equipment with a coach and choose a setup that suits your current training needs.
Inside the ST One boot
A hand-laid carbon-composite base
The ST One uses a carbon-composite base as its structural foundation. The base supports the foot beneath the upper and forms the connection to the blade mounts. Its construction is designed around the demands of short track skating, where a close-fitting boot and carefully adjusted equipment are central to the skater's experience.
Boot construction and boot size should be considered together. Start with measurements and the Bont sizing guide, then assess how the heel, forefoot and ankle sit inside the boot. A supportive base works best when the boot is an appropriate fit for the foot it is holding.
Heat molding for a more personal fit
Bont's epoxy thermoset resin makes the base heat moldable. This allows the fit to be refined after selecting the correct size, helping accommodate the shape of the foot. Follow Bont's current heat-molding instructions or ask an experienced skate fitter for assistance. Heat molding is a way to fine-tune a suitable boot; the sizing decision still comes first.
Inside, Suede-L lining is paired with a 1mm neoprene layer, while the leather innersole sits beneath the foot. High-density memory foam and thicker collar padding complete the interior. These details are worth considering alongside the outer appearance when comparing boots for repeated training sessions.
Cuff shape and adjustable closure
The higher cuff has a modified angle, and the boot uses an updated last. These features shape the support around the ankle and the way the boot fits. Take time to assess the fit in a skating position, paying attention to heel security and pressure around the collar.
Waxed laces let you adjust tension along the foot, with a lace cover and two hook-and-loop straps completing the closure. Make small adjustments as you settle into the boot so the fit feels secure and comfortable. The Durolite exterior gives this model its Gamma Blue/White finish.
The Ultrasprint blade
The Ultrasprint combines a 6061 T6 aluminum tube with 7075 T6 aluminum cups. Its black finish and printed graphics give this package a distinctive contrast against the Gamma Blue/White boot. The blade is machine bent, with an 8m radius, 1.1mm blade thickness and a hardness of 58 Rockwell. These specifications provide useful reference points when discussing equipment with your coach or comparing your next blade.
Preparation before the first session
The Ultrasprint is supplied machine bent but not pre-sharpened. It needs sharpening before use. Have a qualified skate technician check the mounting alignment and blade preparation for your skating needs.
Check that the boot and blade are correctly aligned and that the mounting fasteners are secure before skating. The package image illustrates the combination, but it does not replace a setup check. Once your equipment is prepared, keeping a consistent setup makes it easier to discuss changes in feel with your coach.
Choose your size and package
The listed Bont boot sizes run from 1 to 13.5. Bont sizing should be checked against foot measurements rather than assumed from everyday shoe sizes. Use the Bont sizing guide before selecting your option, especially when changing skate brands or moving to a different boot model.
Blade length is linked to the boot size in this package. Read the complete selected option before adding it to your order. If you have a coach-recommended length or questions about fit, check the available combinations and seek advice before ordering. The selector is the reference for the exact combination supplied.
Package Contents and Technical Specifications
Package Includes
- One pair of Short Track One Carbon Boots in Gamma Blue/White
- One pair of Ultrasprint short track blades in the length shown for your selected size
- 165mm boot mounting separation
Boot Specifications
- Base: Hand laid carbon composite with increased carbon for power transfer
- Outer skin: Durolite
- Liner: Suede-L with a 1mm neoprene layer
- Innersole: Leather
- Heat moldable: Fully heat moldable base using epoxy thermoset resin
- Padding: High density memory foam with thicker collar support
- Closure: Waxed laces, lace cover and two hook-and-loop straps
- Cuff and fit: Higher cuff with a modified angle and an updated last
- Mount: 165mm for the sizes offered in this package
Ultrasprint Blade Specifications
- Tube: 6061 T6 aluminum
- Cups: 7075 T6 aluminum
- Radius: 8m
- Thickness: 1.1mm
- Hardness: 58 Rockwell
- Bend: Machine bent
- Sharpening: Not pre-sharpened
Care between sessions
After skating, dry the blades thoroughly and allow the boots to air out. Check the edges and mounting hardware as part of your regular equipment routine. Sharpening and alignment deserve attention throughout the season, so work with a qualified technician when the blades need preparation or the setup needs adjustment.
Frequently Asked Questions
Is this a pair of skates or one skate?
The package includes one pair of ST One boots and one pair of Ultrasprint blades. Product photos show one skate or component to make the details easier to see.
Can I heat mold the boots?
Yes. The ST One has a heat-moldable epoxy base. Choose the appropriate Bont size first, then follow the current molding guidance to refine the fit.
Which blade length will I receive?
The length is shown in the package option associated with your chosen boot size. Check that full option before placing your order; the photo is not a measurement reference.
Are the blades ready to use straight away?
The Ultrasprint is supplied machine bent but not pre-sharpened. It needs sharpening before use. Have a qualified skate technician check the mounting alignment and blade preparation for your skating needs.
What is the mounting separation?
The boot sizes offered in this package use 165mm mounting separation. Correct mounting alignment and secure fasteners should be checked during setup.