The best boots that I have ever owned. Fit like a custom even though, it's a stock. Super happy!
Built for your race
Your colors. Racing performance.
Four details that make a difference, from the first push to the finish.
Secure lockdown
An anti-stretch lace cover and buckle help hold your foot securely.
Explore the closureCarbon power ridges
Power ridges along the base and sides increase stiffness for more effective power transfer.
Explore the base
A closer look
Performance in the details.
From the carbon base to the padded tongue, each detail has a job to do.
Stiffer resin
The upgraded epoxy resin is 40% stiffer than the BNT’s, helping the shell resist deformation. This figure compares the resin, not the stiffness of the complete boot.
Explore the resinAluminium mounting blocks
Gold-anodized mounting holes sit within aluminium blocks, designed to keep weight low while maintaining strength.
Explore the baseSilver-thread carbon
The silver-thread weave gives the carbon shell its distinctive finish, visible around the side and heel.
Explore the carbonA tongue that stays put
Velcro helps hold the ventilated tongue in position. Padding beneath the laces helps reduce pressure over the top of your foot.
Explore the tongue
Made to your specifications
More than your colors.
Use the MyBonts builder to choose the feel as well as the finish.
- 01
Start with the fit.
Measure both feet, choose your size, and review the fit options before choosing your colors.
- 02
Choose your comfort.
Review the padding and liner choices to match the feel you want around your foot.
- 03
Refine your setup.
Compare the available stiffness, material, and color options in the builder. Your selections define the pair we make.
Find your size
Measure first. Then choose your size.
Bont sizing differs from everyday shoes. Measure both feet in skating socks.
01 / StandStart on a hard floor.
Stand on paper in your skating socks.
02 / MarkMark length and width.
Mark the length and width of both feet.
03 / CompareUse the Slipstream size guide.
Compare your measurements in millimeters.
A closer look
The details, when you need them.
Carbon base and resin
Power ridges run along the base and up the sides to increase rigidity and carbon stiffness for improved power transfer.
The upgraded epoxy resin is 40% stiffer than the BNT’s, helping the shell resist deformation. It is slightly less moldable.
Aluminium mounting blocks have gold-colored anodized holes. The silver-thread carbon weave adds a visual detail to the finish.
Last design and sizing
The new anatomical last gives Slipstream a close-fitting, race-focused shape. The refined sanding process supports more precise fitting.
Measure both feet and use Bont’s size chart before choosing your size. Review the available fit and padding options in the builder.
Lace cover, buckle, and laces
The anti-stretch lace cover has a notch to hold the knot and maintain lace tension. The buckle helps secure the foot, while waxed laces have minimal stretch for tension retention.
Ventilation and tongue
Ventilation throughout the boot supports airflow. The ventilated tongue has Velcro to help keep it in place, with padding to reduce pressure from the laces.
Heat molding: localized adjustment only
Do not heat these boots in an oven. Use localized spot heating with a heat gun on the carbon shell only, keeping heat away from the mounting blocks. Improper heating may cause the mounting blocks to loosen.
MyBonts options and production
Each pair is made to order. Use the builder to select the available materials, colors, stiffness, fit, padding, liner, and other options.
MyBonts Slipstream takes approximately 6-8 weeks to complete, with faster production between June and December.
Screen colors are a close representation. The finished colors and material textures may differ slightly.
From other skaters
Their skates. Their words.
The best boots that I have ever owned. Fit like a custom even though, it's a stock. Super happy!
good